Questions relatives à la fonction autoguidage

[Cyril Cavadore]

As tu des copies d'ecran ?
Le log de l'autoguidage est ceci :

Mouvement trop faible en Delta, requis : 0.06, min : 0.20 pixels
10: DX=0.30 DY=0.06 RA=-138.97ms DEC=0.00ms
Mouvement trop faible en Alpha, requis : 0.02, min : 0.20 pixels
Mouvement trop faible en Delta, requis : 0.04, min : 0.20 pixels
11: DX=0.02 DY=0.04 RA=0.00ms DEC=0.00ms
Mouvement trop faible en Alpha, requis : 0.18, min : 0.20 pixels
Mouvement trop faible en Delta, requis : 0.18, min : 0.20 pixels
12: DX=-0.18 DY=-0.18 RA=0.00ms DEC=0.00ms
13: DX=-0.36 DY=-0.29 RA=143.31ms DEC=-121.43ms
Mouvement trop faible en Delta, requis : 0.09, min : 0.20 pixels
14: DX=-0.43 DY=-0.09 RA=169.45ms DEC=0.00ms
15: DX=-0.58 DY=-0.36 RA=230.72ms DEC=-151.41ms
16: DX=-0.34 DY=-0.21 RA=136.93ms DEC=-87.38ms
17: DX=0.28 DY=0.39 RA=-132.39ms DEC=181.42ms
Mouvement trop faible en Alpha, requis : 0.07, min : 0.20 pixels
Mouvement trop faible en Delta, requis : 0.04, min : 0.20 pixels
18: DX=0.07 DY=0.04 RA=0.00ms DEC=0.00ms
Mouvement trop faible en Delta, requis : 0.17, min : 0.20 pixels
19: DX=-0.55 DY=0.17 RA=217.80ms DEC=0.00ms
20: DX=-0.62 DY=0.20 RA=246.78ms DEC=86.37ms
21: DX=-0.42 DY=-0.27 RA=166.06ms DEC=-114.66ms
Reprise de bcle de guidage !
Dither appliqué, Dx=-0.1 Dy=2.8 pixels
0: Première position étoile X=17.34 Y=18.75 [0] (REPRISE BOUCLE)
0: DX=-1.49 DY=3.09 RA=590.86ms DEC=1404.37ms
1: DX=-1.04 DY=2.95 RA=411.84ms DEC=1343.73ms

[Jchristophe Biavati]

Bonsoir Cyril,
j'ai fait un essai en faisant comme ceci :
dans options, monitoring, j'ai indiqué dans "afficher messages contenant" le mot dither. je n'ai pas fait d'exclusion.

voici un bout de fichier log :

@[0xMain]: 25/10/2012 01:09:59.562 {65.5 ms} : [ARTEMIS library]-> GET Setpoint Temperature = -20.00°C
@[0x04FC]: 25/10/2012 01:10:00.374 {828.2 ms} : [TIS CAM library]-> [CCD #0] Essaie d'initialiser le CCD
[0x04FC]: 25/10/2012 01:10:00.374 {8.1 ms} : [TIS CAM library]-> [CCD #0] section critique passée, initialisation CCD
[0x04FC]: 25/10/2012 01:10:00.384 {7.9 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusInit"
[0x04FC]: 25/10/2012 01:10:00.428 {38.9 ms} : [TIS Library]-> InitExposure : 2000.00 ms
[0x04FC]: 25/10/2012 01:10:00.445 {17.4 ms} : [TIS Library]-> Livestart is about to start...
[0x04FC]: 25/10/2012 01:10:00.504 {61.1 ms} : [TIS Library]-> Livestart effectué.
[0x04FC]: 25/10/2012 01:10:00.512 {8.3 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusPending"
@[0x0B38]: 25/10/2012 01:10:00.800 {296.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:01.050 {257.0 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:01.300 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:01.550 {257.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:01.800 {257.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:02.050 {256.9 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:02.300 {257.0 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:02.550 {257.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0xMain]: 25/10/2012 01:10:02.690 {143.4 ms} : [TIS Library]-> ImageAvailable (1214) (3.9s)
[0xMain]: 25/10/2012 01:10:02.751 {62.9 ms} : [TIS Library]-> StopLive va commencer...
[0xMain]: 25/10/2012 01:10:02.768 {33.0 ms} : [TIS Library]-> StopLive terminé
@[0x0B38]: 25/10/2012 01:10:02.815 {33.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 0B38 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x0B38]: 25/10/2012 01:10:02.815 {13.9 ms} : [TIS CAM library]-> [TIS CAM library]-> OnTimerEventExposure-> Endexposure activé
@[0x0FE4]: 25/10/2012 01:10:02.830 {12.3 ms} : [TIS CAM library]-> [CCD #0] 24/10/2012 23:10:02 Fin de pose, prêt à lire DFx 21AU04.AS
[0x0FE4]: 25/10/2012 01:10:02.846 {14.9 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changed to "ExposureStatusReadOut"
[0x0FE4]: 25/10/2012 01:10:02.862 {20.3 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusEnded"
@[0xMain]: 25/10/2012 01:10:02.893 {28.6 ms} : TDetectorAcquisitionPANEL.RetrieveImage -> End_Display_Image
@[0x04FC]: 25/10/2012 01:10:02.940 {39.9 ms} : Guiding -> Flux=2492.77 Nb=121
[0x04FC]: 25/10/2012 01:10:04.137 {1.2 s} : [TIS CAM library]-> [CCD #0] Essaie d'initialiser le CCD
[0x04FC]: 25/10/2012 01:10:04.137 {8.5 ms} : [TIS CAM library]-> [CCD #0] section critique passée, initialisation CCD
[0x04FC]: 25/10/2012 01:10:04.147 {7.9 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusInit"
[0x04FC]: 25/10/2012 01:10:04.187 {37.2 ms} : [TIS Library]-> InitExposure : 2000.00 ms
[0x04FC]: 25/10/2012 01:10:04.187 {6.9 ms} : [TIS Library]-> Livestart is about to start...
[0x04FC]: 25/10/2012 01:10:04.237 {44.8 ms} : [TIS Library]-> Livestart effectué.
[0x04FC]: 25/10/2012 01:10:04.249 {9.2 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusPending"
@[0x11C0]: 25/10/2012 01:10:04.334 {87.8 ms} : [ARTEMIS library]-> Attempt to read temperature...
[0x11C0]: 25/10/2012 01:10:04.445 {113.9 ms} : [ARTEMIS library]-> CCD Temp = -20.00°C
@[0x1230]: 25/10/2012 01:10:04.505 {61.9 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0x11C0]: 25/10/2012 01:10:04.514 {9.5 ms} : [ARTEMIS library]-> CCD Power= 34%
@[0xMain]: 25/10/2012 01:10:04.580 {67.4 ms} : [ARTEMIS library]-> GET Setpoint Temperature = -20.00°C
@[0x1230]: 25/10/2012 01:10:04.755 {180.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x1230]: 25/10/2012 01:10:05.005 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x1230]: 25/10/2012 01:10:05.255 {257.4 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x1230]: 25/10/2012 01:10:05.505 {256.9 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x1230]: 25/10/2012 01:10:05.755 {257.1 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x1230]: 25/10/2012 01:10:06.005 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x1230]: 25/10/2012 01:10:06.255 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0xMain]: 25/10/2012 01:10:06.476 {226.9 ms} : [TIS Library]-> ImageAvailable (1215) (3.8s)
@[0x1230]: 25/10/2012 01:10:06.505 {30.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 1230 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0xMain]: 25/10/2012 01:10:06.601 {98.8 ms} : [TIS Library]-> StopLive va commencer...
[0xMain]: 25/10/2012 01:10:06.618 {31.5 ms} : [TIS Library]-> StopLive terminé
@[0x1230]: 25/10/2012 01:10:06.759 {130.5 ms} : [TIS CAM library]-> [TIS CAM library]-> OnTimerEventExposure-> Endexposure activé
@[0x1088]: 25/10/2012 01:10:06.759 {8.3 ms} : [TIS CAM library]-> [CCD #0] 24/10/2012 23:10:06 Fin de pose, prêt à lire DFx 21AU04.AS
[0x1088]: 25/10/2012 01:10:06.774 {14.1 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changed to "ExposureStatusReadOut"
[0x1088]: 25/10/2012 01:10:06.790 {18.6 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusEnded"
@[0xMain]: 25/10/2012 01:10:06.821 {28.1 ms} : TDetectorAcquisitionPANEL.RetrieveImage -> End_Display_Image
@[0x04FC]: 25/10/2012 01:10:06.868 {43.5 ms} : Guiding -> Flux=2738.41 Nb=121
[0x04FC]: 25/10/2012 01:10:08.092 {1.3 s} : [TIS CAM library]-> [CCD #0] Essaie d'initialiser le CCD
[0x04FC]: 25/10/2012 01:10:08.092 {7.6 ms} : [TIS CAM library]-> [CCD #0] section critique passée, initialisation CCD
[0x04FC]: 25/10/2012 01:10:08.102 {8.7 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusInit"
[0x04FC]: 25/10/2012 01:10:08.142 {36.6 ms} : [TIS Library]-> InitExposure : 2000.00 ms
[0x04FC]: 25/10/2012 01:10:08.142 {7.6 ms} : [TIS Library]-> Livestart is about to start...
[0x04FC]: 25/10/2012 01:10:08.182 {31.8 ms} : [TIS Library]-> Livestart effectué.
[0x04FC]: 25/10/2012 01:10:08.182 {7.2 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusPending"
@[0x106C]: 25/10/2012 01:10:08.447 {265.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x106C]: 25/10/2012 01:10:08.697 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x106C]: 25/10/2012 01:10:08.947 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x106C]: 25/10/2012 01:10:09.197 {257.0 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0x11C0]: 25/10/2012 01:10:09.334 {141.0 ms} : [ARTEMIS library]-> Attempt to read temperature...
[0x11C0]: 25/10/2012 01:10:09.447 {116.1 ms} : [ARTEMIS library]-> CCD Temp = -20.00°C
@[0x106C]: 25/10/2012 01:10:09.455 {8.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0x11C0]: 25/10/2012 01:10:09.511 {58.0 ms} : [ARTEMIS library]-> CCD Power= 34%
@[0xMain]: 25/10/2012 01:10:09.576 {66.0 ms} : [ARTEMIS library]-> GET Setpoint Temperature = -20.00°C
@[0x106C]: 25/10/2012 01:10:09.697 {124.9 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x106C]: 25/10/2012 01:10:09.947 {257.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x106C]: 25/10/2012 01:10:10.197 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0xMain]: 25/10/2012 01:10:10.411 {220.0 ms} : [TIS Library]-> ImageAvailable (1216) (3.9s)
@[0x106C]: 25/10/2012 01:10:10.456 {46.8 ms} : [HiresTimer] Ontimer proc will be executed soon : 106C Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
@[0xMain]: 25/10/2012 01:10:10.467 {10.5 ms} : [TIS Library]-> StopLive va commencer...
[0xMain]: 25/10/2012 01:10:10.596 {136.2 ms} : [TIS Library]-> StopLive terminé
@[0x106C]: 25/10/2012 01:10:10.705 {109.3 ms} : [TIS CAM library]-> [TIS CAM library]-> OnTimerEventExposure-> Endexposure activé
@[0x0F0C]: 25/10/2012 01:10:10.705 {9.8 ms} : [TIS CAM library]-> [CCD #0] 24/10/2012 23:10:10 Fin de pose, prêt à lire DFx 21AU04.AS
[0x0F0C]: 25/10/2012 01:10:10.720 {17.7 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changed to "ExposureStatusReadOut"
[0x0F0C]: 25/10/2012 01:10:10.752 {20.3 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusEnded"
@[0xMain]: 25/10/2012 01:10:10.767 {27.1 ms} : TDetectorAcquisitionPANEL.RetrieveImage -> End_Display_Image
@[0x04FC]: 25/10/2012 01:10:10.783 {10.2 ms} : Guiding -> Flux=2560.17 Nb=121
[0x04FC]: 25/10/2012 01:10:11.993 {1.2 s} : [TIS CAM library]-> [CCD #0] Essaie d'initialiser le CCD
[0x04FC]: 25/10/2012 01:10:11.993 {7.8 ms} : [TIS CAM library]-> [CCD #0] section critique passée, initialisation CCD
[0x04FC]: 25/10/2012 01:10:12.003 {8.9 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusInit"
[0x04FC]: 25/10/2012 01:10:12.043 {36.3 ms} : [TIS Library]-> InitExposure : 2000.00 ms
[0x04FC]: 25/10/2012 01:10:12.043 {7.0 ms} : [TIS Library]-> Livestart is about to start...
[0x04FC]: 25/10/2012 01:10:12.083 {33.7 ms} : [TIS Library]-> Livestart effectué.
[0x04FC]: 25/10/2012 01:10:12.083 {7.2 ms} : [TIS CAM library]-> [CCD #0] ExposureStatus changé vers "ExposureStatusPending"
@[0x13F4]: 25/10/2012 01:10:12.349 {265.1 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:12.599 {257.1 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:12.849 {257.3 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:13.099 {257.1 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:13.349 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:13.599 {257.1 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:13.849 {257.1 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"
[0x13F4]: 25/10/2012 01:10:14.099 {257.2 ms} : [HiresTimer] Ontimer proc will be executed soon : 13F4 Owner="Timer_OnTimerEventExposure_NT_TIS_IC_MainCCDIndex"




comme tu peux le constater, il n'y a pas le mot "dither"

le dithering ne fonctionne toujours pas.
dernière mise à jour chargée

autoguidage : ok par dfk et usbguider

un email a été envoyé avec le log complet

jc

[Cyril Cavadore]

Il faut aussi le log du guidage, celui qui est dans la fenetre d'etat du guidage.
Je l'ai fusionné depuis peu avec le log general du programme, mais je ne pense pas que tu possede cette version.