Bonjour,
La doc indique
Auto_PlateSolve Img Cat$ Focus SizePixX SizePixY RA DEC StarCompCat StarCompImg NSorient PolyDegree DirCat$ Valid [FocLength]
Que signifie le dernier paramètre entre crochets. Est-il utilisable ?
Lorsque je le rajoute, j'obtiens une erreur concernant le nombre de paramètres ("doit être égal à 13").
Merci par avance
François
Paramètres pour l'appel AUTO_PLATESOLVE
-
- Messages : 69
- Enregistré le : 04 août 2016, 18:39
- Localisation : Lajoux, Suisse
-
- Messages : 4492
- Enregistré le : 18 juin 2009, 22:41
- Localisation : 42
Re: Paramètres pour l'appel AUTO_PLATESOLVE
Essaie en mettant le parametre Foclength (c'est un parametre de sortie)
Cyril Cavadore, ALCOR-SYSTEM, Auteur de PRISM
http://www.alcor-system.com
Pour reporter vos problème, la marche à suivre est ici
viewtopic.php?f=7&t=1403
http://www.alcor-system.com
Pour reporter vos problème, la marche à suivre est ici
viewtopic.php?f=7&t=1403
-
- Messages : 69
- Enregistré le : 04 août 2016, 18:39
- Localisation : Lajoux, Suisse
Re: Paramètres pour l'appel AUTO_PLATESOLVE
J'avais essayé (pour moi les crochets signifient paramètre supplémentaire non obligatoire).
Voici ce qu j'obtiens
Le script s'est arrêté à cause d'une erreur fatale :
ERREUR : Ligne : @ 67 -> "Auto_PlateSolve Img Cat$ Focus TaillePixX*BinX TaillePixY*BinY AD DC NbStarCat NbStarImg NSorient PolyDeg CatPath$ Valid FocLength" ,
La fonction AUTO_PLATESOLVE doit avoir 13 paramètres
Script terminé ...
Voici ce qu j'obtiens
Le script s'est arrêté à cause d'une erreur fatale :
ERREUR : Ligne : @ 67 -> "Auto_PlateSolve Img Cat$ Focus TaillePixX*BinX TaillePixY*BinY AD DC NbStarCat NbStarImg NSorient PolyDeg CatPath$ Valid FocLength" ,
La fonction AUTO_PLATESOLVE doit avoir 13 paramètres
Script terminé ...
-
- Messages : 4492
- Enregistré le : 18 juin 2009, 22:41
- Localisation : 42
Re: Paramètres pour l'appel AUTO_PLATESOLVE
et si tu remplaces
TaillePixX*BinX
par
TaillePixX=TaillePixX*BinX
et utilise TaillePixX comme cela.
je ne suis pas sur que .... mais faut essayer.
TaillePixX*BinX
par
TaillePixX=TaillePixX*BinX
et utilise TaillePixX comme cela.
je ne suis pas sur que .... mais faut essayer.
Cyril Cavadore, ALCOR-SYSTEM, Auteur de PRISM
http://www.alcor-system.com
Pour reporter vos problème, la marche à suivre est ici
viewtopic.php?f=7&t=1403
http://www.alcor-system.com
Pour reporter vos problème, la marche à suivre est ici
viewtopic.php?f=7&t=1403
-
- Messages : 69
- Enregistré le : 04 août 2016, 18:39
- Localisation : Lajoux, Suisse
Re: Paramètres pour l'appel AUTO_PLATESOLVE
Merci pour l'idée.
Hélas, pas de succès.
Hélas, pas de succès.
-
- Messages : 4492
- Enregistré le : 18 juin 2009, 22:41
- Localisation : 42
Re: Paramètres pour l'appel AUTO_PLATESOLVE
Voila la "doc" que j'ai ->
EtalonAstrometrieAuto Img Cat$ Focal TaillePixX TaillePixY AD DC NbStarCat NbStarImg NSo PolyDeg Chem$ Valid
// Img :image
// Cat$ : 'GSC' 'USNO SA' 'USNO A1' 'USNO A2' 'Hipparcos' 'SAO' 'BSC' 'Tycho1' 'GSC-ACT' 'Tycho2'
// Focal : Telescope focal length , mm
// taillePixX : Pixel Size X µm
// taillePixY : Pixel Size Y µm
// NbStarCat : Nbre star in cat max
// NbStarImg : Nbre star Img max
// Nso : North South Oriented
// PolyDeg : polynom degree
// Chem$ : Catalog Path, If needed
// Valid : valid plate solve
Le FocLength est inutile a la fin.
EtalonAstrometrieAuto Img Cat$ Focal TaillePixX TaillePixY AD DC NbStarCat NbStarImg NSo PolyDeg Chem$ Valid
// Img :image
// Cat$ : 'GSC' 'USNO SA' 'USNO A1' 'USNO A2' 'Hipparcos' 'SAO' 'BSC' 'Tycho1' 'GSC-ACT' 'Tycho2'
// Focal : Telescope focal length , mm
// taillePixX : Pixel Size X µm
// taillePixY : Pixel Size Y µm
// NbStarCat : Nbre star in cat max
// NbStarImg : Nbre star Img max
// Nso : North South Oriented
// PolyDeg : polynom degree
// Chem$ : Catalog Path, If needed
// Valid : valid plate solve
Le FocLength est inutile a la fin.
Cyril Cavadore, ALCOR-SYSTEM, Auteur de PRISM
http://www.alcor-system.com
Pour reporter vos problème, la marche à suivre est ici
viewtopic.php?f=7&t=1403
http://www.alcor-system.com
Pour reporter vos problème, la marche à suivre est ici
viewtopic.php?f=7&t=1403