Prism v.10 autoguiding settings

Configurer PRiSM comme je veux !
Répondre
dan_adrian
Messages : 29
Enregistré le : 09 août 2021, 10:03

Prism v.10 autoguiding settings

Message par dan_adrian »

Hello, the english forum is not active for some time and I thought I should ask for help here.
A few nights ago I calibrated my guider camera on the east side of the meridian. Everything worked ok, but after I made a meridian flip, the guiding in the west of the meridian showed large errors in DEC and guiding stoped. If I recalibrate the guider on the west, after the flip, everything works ok.
So do I have to calibrate the guider after each meridian flip?
dan_adrian
Messages : 29
Enregistré le : 09 août 2021, 10:03

Re: Prism v.10 autoguiding settings

Message par dan_adrian »

Problem solved. I had to check the option "reverse guide mode when looking East (DEC)" in my mount software. Now I don't have to recalibrate the guider when passing the meridian
Répondre